The Function of the Working Fluid of the CNC Pipe Cutting Machine
ARCBRO, the most experienced CNC cutting machine manufacturer, is going to introduce the function of the working fluid of the CNC pipe cutting machine.
- The quality of the CNC pipe cutting machine working fluid
The quality of the CNC pipe cutting machine working fluid has great influence on the processing. Generally speaking, the working fluid of the CNC pipe cutting machine should have good dielectric properties as well as cooling and lubrication ability. Users can choose the appropriate working fluid according to their own experience.
- The concentration of the mixing ratio of the CNC pipe cutting machine
Usually, the concentration ratio of the working fluid is between 5% and 15%. As for those workpieces which need high surface roughness and precision of the pipe cutting machine, the concentration can be relatively higher, while for those need high speed and large thickness, the concentration should be smaller.
- The replacement of the CNC pipe cutting machine
If the CNC pipe cutting machine working fluid is too dirty, it will have a certain impact on the pipe machining. So we should replace the working fluid of the CNC pipe cutting machine regularly, especially in the following two cases:
- Under normal circumstances, the molybdenum wire should be gray white after some time processing (except for processing the large thickness workpiece). If the molybdenum wire is changed from gray to gray white with black strips or black spots, it indicates that the working fluid of the pipe cutting machine is too dirty and needs to be replaced.
- Sometimes the molybdenum wire also presents the gray white, but when cutting thick workpiece, no matter how to adjust the processing parameter, the processing current always is not stable, then the working fluid should not continue to use.
More operation and maintenance knowledge about CNC cutting machine, please visit www.arcbro.com.